Image description
enable pci express slot in bios
Cara Memeriksa Nomor Slot PCI-E melalui BIOS

1. Tujuan

FAQ ini bertujuan untuk memandu pengguna dalam memetakan konfigurasi PCI-E BIOS ke slot fisik PCI-E.

2. Audiens

Pemilik SKY-8132S.

3. Langkah-langkah

  1. Jalankan perintah berikut untuk memastikan OS mendeteksi kartu PCI-E:
    [root@8132-efi ~]# lspci -s 000:00.0 System peripheral: Intel Corporation Device 09a2 (rev 04)00:00.1 System peripheral: Intel Corporation Device 09a4 (rev 04)...51:00.0 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)51:00.1 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)51:00.2 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)51:00.3 Ethernet controller: Intel Corporation Ethernet Controller X710 for 10GbE SFP+ (rev 02)89:00.0 System peripheral: Intel Corporation Device 09a2 (rev 04)89:00.1 System peripheral: Intel Corporation Device 09a4 (rev 04)89:00.2 System peripheral: Intel Corporation Device 09a3 (rev 04)89:00.4 Host bridge: Intel Corporation Device 0998c2:00.0 System peripheral: Intel Corporation Device 09a2 (rev 04)
  2. Kemudian, jalankan perintah lspci –t atau lspci | grep Eth untuk mendeteksi nomor bus yang benar:
    [root@8132-efi ~]# lspci -t-+-[0000:ff]-+-00.0| +-00.1| +-00.2. . .+-[0000:50]-+-00.0| +-00.1| +-00.2| +-00.4| +-02.0-[51]--+-00.0| | +-00.1| | +-00.2| | \-00.3
  3. Periksa pengaturan status tautan saat ini:
    [root@8132-efi ~]# lspci -s 51:00.0 -vvv | grep -i widthLnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L1 <16usLnkSta: Speed 8GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  4. Boot ke BIOS dan pilih Hardware >> Northbridge >> PCI Express Ports Configuration >> untuk memeriksa pengaturan saat ini (harus sama seperti di atas):
  5. Ubah kecepatan tautan sesuai pengaturan di BIOS:
  6. Setelah menerapkan perubahan di BIOS, Anda dapat menemukan kandang PCI-E pada perangkat dengan memeriksa kecepatan status tautan:
    [root@8132-efi ~]# lspci -s 51:00.0 -vvv | grep -i widthLnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L1, Exit Latency L1 <16usLnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

Catatan: Jika Anda hanya memiliki satu kartu PCI-E, Anda dapat mencoba menukarnya ke slot lain untuk mengonfirmasi nomor port.

© 2026 - Semua hak dilindungi undang-undang. PT dengan modal Rp 10.000.000.000. Jl. Jend. Sudirman Kav. 52-53, Jakarta Selatan 12190